fbpx

Australia's Favourite Backyard Space

Australian made – Environmentally focused – Suitable for all climates

High-Quality Garden Studios & Pods

Shed Living design and develop high-quality outdoor garden studio pods. We can customise our garden studios to meet whatever needs you have for your space. This includes a range of applications including a backyard office, additional bedroom, music room, poolside kabana or personal retreat. 

Our studios and cabin spaces are 100% Australian-made, meticulously built and exhibit quality craftmanship – that’s why all come with an industry leading 30-year manufacturers warranty. 

Our Collection

Simple, the way it should be

Discovery & Selection

Our consultants will run through the most suitable choice for your Shed Living garden studio kit. We can customise the outdoor space to meet your requirements. 

Delivery & Install

Your selected garden cabin kit will be delivered in as little as 4 weeks and installed by our local installer network in as little as 2 – 3 days.

Fitout & Handover

Once the outdoor pod is installed, it’s ready for fitout. Our installer network can assist you to ensure a smooth process or you can organise your own. 

Our Suppliers

FAQs

Yes, all sheds are designed in Australia and components are Australian manufactured.

In NSW, garden sheds are exempt from Council approval if designed and constructed in accordance with the development standards. Our studio kits have been designed to comply with the current regulations. 

Each state has slightly different regulation. We have partners who can assist with regulations and council approvals for a minimal fee upon request. 

Our sheds and other builds are made using Stramit® roofing, wall cladding and other roll formed steel products.

These are made from steel coil which has been independently tested and found to have a Spread of Flame Index of 0, in accordance with the Australian Standard AS1530.3.

This means that Stramit® products made from these steel sources and with the tested finishes would be considered non-combustible according to NCC 2019 Volume One Part C1.9(e) and Volume Two Part 3.7.1.1.

It is important to note that Stramit® sheeting is only one component used in construction of these building elements, and other components must also meet the necessary requirements to satisfy the criteria.

For information on performance of residences in a bushfire situation, please refer to the bulletin based on the NASH Bushfire Standard on the Bluescope® website.

Read Stramit’s full Flammability Statement here.

Of course – we design our sheds and patios to the 2019 National Construction Code of Australia, as well as AS/NZS 4600-2018, AS/NZS 1170.0,.1,2,3,4-2011, AS2870-2011, AS3600-2018 Australian standards.

As of August 2022, it is currently 8 weeks.

It’s best practice to keep your building clean and free from any dirt or contaminants.

A good wash with a hose from time to time will keep it looking great and free from rust.

Component manufacturers may also offer specific information on how to properly care for your building parts to ensure any relevant component warranty conditions are met.

As with any metal product such as a patio or car, keeping it clean will increase the lifetime of the product.

Yes, we have capacity to travel all over the state and install the kits to lock up stage or even completely fit off the kit from start to finish.

Extra charges apply for outside of Sydney Metro.

There is a 30 year structural warranty on the steel components of the shed.

Cedar windows and doors are warranted by the Manufacturer against defects in material that might result for a period of ten years from the date of installation.

The warranty shall remain in effect only if normal cleaning practices are followed periodically, as described in the ‘maintenance and cleaning instructions’ accompanying the warranty.

We use ‘Nearmaps’, a sophisticated hi-res mapping system to locate the positioning of the site.

If a site inspection is required please book with the Shed Living team by contacting Bookings@shedliving.com.au, our friendly and knowledgeable staff would be happy to assist.

At this stage, we don’t have a showroom. Speak with our friendly-team to get comprehensive information about our studios.

Unfortunately, at this stage we don’t. We have plans for 2024 to open one up in Sydney. We do however have virtual tours featured on our website which help get a feel for the backyard pods we supply. 

Yes, the designs include the pre-selected colours.

Should you need a different colour in any area, please speak to our specialists about your needs.

No, all of our designs products require our own pre-selected materials to keep costs down and avoid extra engineering.

At the moment we are only offering garden studios, but stay tuned for our future offerings.

Some of our clients use our shed living studios or unattached offices, man caves, she sheds, yoga studios, and gyms.

Due to engineering constraints we are not able to retro fit a studio to an existing structure.

Yes, one of the best things about our product is that we can customise size down to the mm. Fees may apply.

Yes, we can as long as it’s bigger than the existing slab perimeter otherwise the slab would need to be demolished.

Typically this will be a 2-3 day process. Pending site and weather conditions.

Contact us

Reach out to the team at Shed Living and we will get back to you as soon as possible.

Phone: 1300 854 630

Melbourne (by appointment only):
37 Rosie Place, Altona, VIC 3018

Sydney (by appointment only):
Suite 1006, 1 Barratt St, Hurstville, NSW 2220

Social Media